Product Instructions
The most important aspect of wearing EARPEACE earplugs properly is to position the tab so you can easily & safely insert and remove them. Please give this video a look. It is a helpful guide on how to insert & remove your earplugs.
Inserting EARPEACE
STEP 1: Start by pinching the silicone pull-tab between index finger and thumb as illustrated, making sure the tab is on top.
STEP 2: Reach over your head with the opposite hand & gently pull up and back on the outer ear. This straightens the ear canal & allows for correct positioning & maximum protection. Insert the earplug until comfortably snug, using your thumb to gently apply pressure against the plastic filter to guide the earplug. Gently wiggling the earplug back and forth a little will help. Be gentle!
- DO NOT release the tab until you have successfully positioned the earplug in ear
- DO NOT push the earplug further into ear after releasing the tab.
STEP 3: In order to remove, pinch the pull tab again and gently slide out of your ear.
Changing your filters
STEP 1: Use thumb and index finger to press on top and bottom of plug.
STEP 2: Filter will pop out.
STEP 3: Carefully remove filter with thumb and index finger. Replace desired filter in same manner.
Caring for your earplugs
STEP 1: EARPEACE is easy to clean & maintain. Clean after each use with a damp cloth. Keep them stored in the aluminum case.
STEP 2: If they become dirty you can wash them in warm soapy water. Be sure to remove the attenuation filter before washing. Reinsert the filter only after the earplugs have dried thoroughly.
STEP 3: Your earplugs should be replaced at any sign of wear & tear.
Connector Cord instructions
STEP 1: Pinch the silicone pull-tab between your index finger and thumb, making sure the tab is on top.
STEP 2: Use your thumb and index finger to invert the flanges (flipping them in the opposite direction).
STEP 3: Pull the loop end over the tab
STEP 4: Stretch it to fit over the filter.
STEP 5: Adjust the cord end around the plug to position it in the proper direction and orientation to the pull tab.
STEP 6: Use your thumb and index finger to reinert flanges.
Need more assistance?
If you are still unsure how to properly insert your EARPEACE or have fit questions, please contact us. We are always happy to help.